Corbett Industries - Component Part Sales

Does your company need a one-stop source for process heating equipment?

Have you been searching for component and replacement parts?

The advantages of Corbett Industries

A Partial List of Products We Stock:

**BURNERS, MIXERS, AND BLOWERS**
Burner Nozzles, Flame Retention Type Self-piloting ports. Operate with or without mounting tile. 3/4" to 8"mixture pipe sizes	Aspirator Mixers For use with air blower. Air inspirates zero gas. Sensitive V-port for gas/air ratio adjustment. Interchangeable rod for capacity adjustment. 3/4" to 8" air and mixture pipe sizes	Multi-purpose Burners High stability with excess air, excess fuel or correct ratio. Short, high- velocity flames. Required gas pressures very low. Low and high temperature models. 3/4" to 6" air pipe sizes.	Blowers -For combustion air -Direct or belt driven	Gas/Oil Burners With Integral Blower Capacities to 5,000,000 Btu/hr. Gas/oil burners provide combustion clean enough for direct firing of critical grain, cloth and food processing applications and others.

**FLAME SAFEGUARDS AND SENSORS**
Programmed, Microcomputer Burner Control Systems For automatically fired single burner applications. Annunciation, self - diagnostics, and energy conservation save downtime, service time, and energy costs.	Flame Safeguards Provide automatic ignition and flame safeguard control for commercial sizes of heating and process burners using gas and/or light fuels.	Ultraviolet Flame Detectors Detect radiation emitted from all flames. They are used with flame safeguard controls to provide supervision for gas, oil or combination gas-oil burners.	Flame Rod Holders & Assemblies Facilitate the use of flame rods on gas burners or gas-ignited oil burners which are controlled by electronic flame safeguard control systems.

**SHUT-OFF AND SAFETY VALVES**
Gas & Oil Valves These are normally - closed safety shut-off valves. Powering of an internal solenoid permits manual or motorized opening. Interruption of solenoid power supply gives virtually instantaneous closure.	Fluid Power Gas Valve Actuators Provides safety shut-off for gas supply to commercial and industrial burners.	Industrial Gas Valves Use with fluid power actuators for natural, mixed, manufactured, or LP gases.	General and Special Purpose Solenoid Valves Normally closed or normally open for on-off control of air, gas, liquids and steam.

**REGULATORS**
Low Gas Pressure Regulators Capacities to 30,000 ft3/h ambient temperature limits from -40 deg. to 200 deg. F.	High Pressure Gas Regulators Wide range of capacities, inlet and outlet pressures.	Gas/Air Ratio Regulators Atmospheric regulator or cross - connected governor. Constant air/gas ratio at all firing rates. 3/4" to 4" pipe sizes.	Air/Oil Regulators Accurate, automatic proportioning of oil to air flow. 1/2" and 3/4" pipe size for 36 to 274 gph.

**PRESSURE SWITCHES AND GAUGES**
U-Tube Manometers Manometers measure positive, negative and differential pressures.	Pressure Gauge Indicates low positive, negative, or differential air or gas pressure.	Differential Pressure Switches Will signal or control electrically in response to air pressure differentials.	GAS/AIR Pressure Switches Limit controls for industrial gas systems.	High Low Gas Pressure Combination switch monitors both high and low pressures dependently.

**TEMPERATURE CONTROLLERS**
Microprocessor Based Process Controllers Handle a multitude of input types and offer features that will control everything from a simple on/off application to one requiring dual 4-20 mA outputs.	Digital Control Programmers These instruments generate and control process variable versus time profiles for applications such as vacuum and atmosphere heat - treat furnaces, batch ovens, kilns, environmental chambers, dye becks, and many others.	Mechanical Control Instruments These controls provide temperature indication, control, recording, &/or programming with simple, reliable mercury filled sensing elements.

**CONTROL VALVES & ACTUATORS**
Electrical Actuators Low Torque, Medium Torque and Spring Return. These actuators provide the requirements of both damper control and valve control applications where it is desirable to move the load in either direction, or to stop it at any point in the stroke.	Control Valves with Integral Operators For 2-position control of air up to 5 psi. Simplified compact, direct electric drive.	Pneumatic Valve Actuators Power devices which operate on a small air signal from a controller and convert this signal into mechanical motion.	Flow Control Valves Consist of two or more valve sub - assemblies, at least one featuring an adjustable gradient design.

**TEMPERATURE SENSING ASSEMBLIES & COMPONENTS**
Protected Thermocouples A metal sheath and tightly compacted ceramic insulation protect the thermocouple elements.	Thermocouple Components	Thermocouple Assemblies for High Temperatures A complete line of high temperature thermocouples is available in a selection of protection tube material and sizes and choice of calibration material.

We Are a Stocking Distributor of the Following Major Manufacturers:

-AMF/Cuno
-Automatic Switch Company (ASCO)
-Barber-Colman Company
-Brixon Manufacturing Company
-Chicago Safety Products Company
-Consolidated Ceramic Products Inc.
-Dewey Gas Furnace Company
-Dongan Transformer Co.
-Dwyer Instruments Inc.
-Eagle Signal Industrial Controls
-Eclipse Inc.
-Edwards Company inc.
-Electronics Corporation of America (Fireye)
-Ensign Ribbon Burners Inc.
-Fisher Governor Company
-GTE Sylvania Products Corp.
-General Controls ITT
-Hoke Inc.
-Honeywell Inc.

-Intermatic Inc.
-Love Controls Corporation
-Magnatrol Valve Corporation
-Marsh Instrument Company
-Maxitrol Company
-Maxon Corporation
-Mercoid Company
-Norel Inc.
-North American Manufacturing Co.
-The Partlow Corporation
-Penn Baso Products
-Protection Controls Inc.
-Pyromation Inc.
-Pyronics Inc.
-Rotron Inc. Industrial Div.
-SL Auburn Inc.
-Thermo Electric Company Inc.
-Vesuvius Crucible Company
-Watson McDaniel Company